Using quality drill pipe in your drill string is best for your drill rig and drilling performance.
Secoroc Tubes -- Part of a Productive Package
Though their importance is often underestimated, tubes play an important role in DTH drilling -- regardless of application, rock type, hole depth, or drill rig. The key features of a high quality DTH tube are durability, accuracy, and manageability.
High Quality Tubing
Secoroc tubes are made from cold drawn tubing, providing a superior surface finish and tolerance compared to their hot-rolled counterparts. Our solution drastically reduces the risk of scaling -- the cause of so many premature hammer failures.
No Weak Links
Traditionally the threads and the joint between the tube and the end-pieces are vulnerable. To combat the problem we've friction-welded the joints for maximum strength and heat-treated the end-pieces for optimum durability.
Never Losing the Thread
Heat-treating the threads ensures not only a long service life, but also simplifies joining and breaking -- thereby cutting cycle time. To meet varying demands, we provide a selection of API threads. For applications where foam injection are used, we recommend the IF thread. Naturally, we also offer a wide range of subs and crossovers -- all made of high quality steel and heat-treated in the same way as tube end-pieces.
Pipes From 4-1/2" and Wall Thickness >0.346"
Hot Rolled Grade API J-55
Technical Spec:
| Tubing J-55 | Tool Joints, Adapters |
| Tensile Strength (RM) min. | 75,000 PSI | Surface Hardness | 58-62 HRC |
| Yield Strength (ReH) min. | 55,000 PSI | Depth | 0.080" |
| Elongation (A5) min. | 15% | Core Hardness | 32-36 HRC (approx. 300 HB) |
Hot rolled tubing fits inside the API N-80 standard, but it has the following shortcomings:
- The hot rolled surface is rough and can release scaling from the inside, which can enter into the hammer and cause severe damage to internal components.
- A rough surface gives higher friction losses, resulting in a higher pressure drop in the drill string.
- Wide tolerance of the wall thickness +/- 10-12%.
- Straightness tolerance not assigned. Must be straightened after welding.
- Production problems due to wide tolerances.
Pipes From 2-3/4" to 4-1/2" and Wall Thickness >0.346"
Hot Rolled Grade API J-55
Technical Spec:
| Tubing N-80 | Tool Joints, Adapters |
| Tensile Strength (RM) min. | 100,000 PSI | Surface Hardness | 58-62 HRC |
| Yield Strength (ReH) min. | 80,000 PSI | Depth | 0.080" |
| Elongation (A5) min. | 18% | Core Hardness | 32-36 HRC (approx. 300 HB) |
In order to improve the quality of DTH tubes we are now changing over to cold drawn tubing, and the features and benefits are as follows:
| Feature | Hot Rolled Tubing | Cold Drawn Tubing |
| Ovality | Included in the tolerance for the wall | Included in the tolerance for the wall |
| Wall Thickness | +/- 10-12% | +/- 3-4% |
| Straightness | N/A | 0.012"/ft |
Benefits in Short of Cold Drawn Tubing:
- Reliable wall thickness
- Less ovality, less risk of eccentric wear
- Better quality of the friction weld, less risk of concentricity of welding
- Better wear resistance due to increased hardness
- Reliable weights max 2-3% variance
- Less risk of damage to the tube from the straightening operation
- An overall weight reduction of our DTH tube assortment
- Still API N-80 standard for tubing
Friction Welding 2-3/4" to 5-1/2" ---- Over 5-1/2" Shrink Fit and Stick Welded
Friction Welding:
- Friction welding is a safe and efficient way to weld the end-pieces on to the tube material. The welding becomes stronger than the tube.
- Friction welding is a combination between friction and pressure.
- The end-pieces rotate with a speed of 480 RPM, and the pressure is between 1,015 PSI and 2,175 PSI depending on the tube diameter and wall thickness.
Friction Welded:
- Friction welding gives much stronger joints, compared with electrode welding, due to less risk of impure joints.
| Rotary Head | The power unit that rotates the drill string. |
| Spindle Adapter | Also called a "saver sub," threads into the rotary head and drill pipe, protects the threads of the rotary head, considered to be part of rotary head. |
| Drill Pipe | Available in a variety of lengths, diameters, wall thicknesses, and thread configurations. |
| Starter Pipe | Similar to the drill pipe, always the first pipe in the hole, usually shorter to compensate for the length of the DTH hammer, and with a greater wall thickness to withstand more abrasion as the hole is drilled. |
| Sub Adapter | Usually a short adapter, threaded on both ends in a male/female, female/female, male/male configuration. May be used to increase or decrease the thread diameter or change the thread style as needed for a particular application. |
| DHT Hammer/ DTH Bit | The percussive mechanism that drills the hole. Available in a wide range of diameters and styles depending on the application. |
| Rotary (Tricone) Bit | May take the place of the DTH Hammer and Bit in applications where percussive drilling is not required. |
Click on below tabs for detailed information
| Wrench Flats | |
| Dia (inch) | Thread Pin/Box* | Comp | Wall Thick (inch) | Length (feet) | inch | Flat loc | Hex (inch) | Wgt (lbs.) |
| 3.50 | 2-3/8 API reg | Pipe | 0.500 | 30.0 | 3.5 | Both Ends | No | 491 |
| 3.50 | 2-3/8 API reg | Pipe | 0.337 | 25.0 | 2.5 | Both Ends | No | 315 |
| 3.50 | 2-3/8 API reg | Starter Pipe | 0.750 | 21.0 | 2.5 | Both Ends | No | 485 |
| 3.50 | 2-3/8 API reg | Starter Pipe | 0.500 | 26.6 | 3.5 | Both Ends | No | 441 |
|
| 4.00 | 2-7/8 API reg | Pipe | 0.337 | 30.0 | 3.5 | Pin Only | 3.50 | 489 |
| 4.00 | 2-7/8 API reg | Pipe | 0.750 | 30.0 | 3.5 | Pin Only | 3.50 | 751 |
| 4.00 | 2-7/8 API reg | Pipe | 0.337 | 25.0 | 3.5 | Pin Only | 3.50 | 421 |
| 4.00 | 2-7/8 API reg | Pipe | 0.337 | 25.0 | 3.0 | Both Ends | No | 410 |
| 4.00 | 2-7/8 API reg | Pipe | 0.337 | 25.0 | 3.5 | Both Ends | No | 410 |
| 4.00 | 2-7/8 API reg | Starter Pipe | 0.750 | 26.6 | 3.5 | Pin Only | No | 520 |
| 4.00 | 2-7/8 API reg | Starter Pipe | 0.337 | 21.0 | 3.0 | Both Ends | No | 313 |
| 4.00 | 2-7/8 API reg | Starter Pipe | 0.337 | 21.0 | 3.5 | Both Ends | No | 313 |
| 4.00 | 2-7/8 API reg | Starter Pipe | 0.750 | 21.0 | 3.5 | Both Ends | No | 388 |
|
| 4.50 | 2-7/8 IF | Pipe | 0.337 | 25.0 | 3.5 | Pin Only | 4.00 | 412 |
| 4.50 | 2-7/8 IF | Starter Pipe | 0.625 | 21.0 | 3.5 | Both Ends | No | 584 |
| 4.50 | 2-7/8 IF | Pipe | 0.337 | 30.0 | 3.5 | Pin Only | 4.00 | 489 |
| 4.50 | 2-7/8 IF | Pipe | 0.337 | 20.0 | 3.5 | Box Only | No | 344 |
| 4.50 | 3-1/2 API reg | Pipe | 0.625 | 25.0 | 3.5 | Pin Only | 4.00 | 833 |
| 4.50 | 3-1/2 API reg | Pipe | 0.337 | 30.0 | 3.5 | Pin Only | 4.00 | 489 |
| 4.50 | 3-1/2 API reg | Pipe | 0.750 | 30.0 | 3.5 | Pin Only | 4.00 | 989 |
| 4.50 | 3-1/2 API reg | Pipe | 0.500 | 30.0 | 3.5 | Pin Only | 4.00 | 667 |
| 4.50 | 3-1/2 API reg | Pipe | 0.430 | 35.0 | 3.5 | Pin Only | 4.00 | 760 |
| 4.50 | 3-1/2 API reg | Starter Pipe | 0.750 | 26.6 | 3.5 | Pin Only | No | 855 |
| 4.50 | 3-1/2 IF | Pipe | 0.337 | 20.0 | 3.5 | Box Only | No | 344 |
|
| 5.00 | 3-1/2 API reg | Pipe | 0.375 | 25.0 | 3.5 | Pin Only | 4.00 | 562 |
| 5.00 | 3-1/2 API reg | Pipe | 0.500 | 25.0 | 3.5 | Pin Only | 4.00 | 630 |
| 5.00 | 3-1/2 API reg | Pipe | 0.750 | 25.0 | 3.5 | Pin Only | 4.00 | 907 |
| 5.00 | 3-1/2 API reg | Pipe | 0.500 | 30.0 | 3.5 | Pin Only | 4.00 | 756 |
| 5.00 | 3-1/2 API reg | Pipe | 0.337 | 30.0 | 3.5 | Pin Only | 4.00 | 837 |
| 5.00 | 3-1/2 API reg | Pipe | 0.750 | 30.0 | 3.5 | Pin Only | 4.00 | 1,081 |
| 5.00 | 3-1/2 API reg | Pipe | 0.500 | 35.0 | 3.5 | Pin Only | 4.00 | 874 |
| 5.00 | 3-1/2 API reg | Pipe | 0.750 | 35.0 | 3.5 | Pin Only | 4.00 | 1,264 |
| 5.00 | 3-1/2 API reg | Starter Pipe | 0.750 | 26.6 | 3.5 | Both Ends | No | 980 |
| 5.00 | 3-1/2 API reg | Starter Pipe | 0.375 | 21.6 | 3.5 | Both Ends | No | 485 |
| 5.00 | 3-1/2 API reg | Starter Pipe | 0.750 | 29.6 | 3.5 | Both Ends | No | 1,086 |
| 5.00 | 3-1/2 API reg | Starter Pipe | 0.750 | 31.6 | 3.5 | Both Ends | No | 1,159 |
| 5.00 | 3-1/2 Beco | Pipe | 0.750 | 30.0 | 3.5 | Pin Only | 4.62 | 1,097 |
| 5.00 | 3-1/2 Beco | Pipe | 0.500 | 30.0 | 3.5 | Pin Only | 4.62 | 773 |
| 5.00 | 3-1/2 Beco | Pipe | 0.500 | 35.0 | 3.5 | Pin Only | 4.62 | 892 |
| 5.00 | 3-1/2 Beco | Pipe | 0.500 | 25.0 | 3.5 | Pin Only | 4.62 | 654 |
| 5.00 | 3-1/2 Beco | Starter Pipe | 0.500 | 26.6 | 3.5 | Pin Only | No | 573 |
| 5.00 | 3-1/2 Beco | Starter Pipe | 0.500 | 21.6 | 3.5 | Pin Only | No | 551 |
|
| 5.50 | 3-1/2 Beco | Pipe | 0.415 | 25.0 | 4.5 | Both Ends | 5.00 | 733 |
| 5.50 | 3-1/2 Beco | Pipe | 0.415 | 30.0 | 4.5 | Both Ends | 5.00 | 866 |
| 5.50 | 3-1/2 Beco | Pipe | 0.750 | 30.0 | 4.5 | Both Ends | 5.00 | 1,240 |
| 5.50 | 3-1/2 Beco | Pipe | 0.750 | 25.0 | 4.5 | Both Ends | 5.00 | 1,044 |
| 5.50 | 3-1/2 Beco | Pipe | 0.750 | 35.0 | 4.5 | Both Ends | 5.00 | 1,434 |
| 5.50 | 3-1/2 Beco | Starter Pipe | 0.415 | 25.8 | 4.5 | Both Ends | No | 685 |
| 5.50 | 3-1/2 Beco | Starter Pipe | 0.415 | 20.8 | 4.5 | Both Ends | No | 621 |
|
| 6.25 | 4 Beco | Pipe | 0.500 | 25.0 | 4.5 | Both Ends | 5.00 | 868 |
| 6.25 | 4 Beco | Pipe | 0.500 | 30.0 | 4.5 | Both Ends | 5.00 | 1,013 |
| 6.25 | 4 Beco | Pipe | 0.750 | 30.0 | 4.5 | Both Ends | 5.00 | 1,447 |
| 6.25 | 4 Beco | Pipe | 0.500 | 35.0 | 4.5 | Both Ends | 5.00 | 993 |
| 6.25 | 4 Beco | Pipe | 0.750 | 35.0 | 4.5 | Both Ends | 5.00 | 1,678 |
| 6.25 | 4 Beco | Starter Pipe | 0.500 | 25.8 | 4.5 | Both Ends | No | 899 |
| 6.25 | 4 Beco | Starter Pipe | 0.500 | 20.8 | 4.5 | Both Ends | No | 747 |
|
| 7.00 | 4-1/2 Beco | Pipe | 0.750 | 25.0 | 5.0 | Pin Only | 6.00 | 1,410 |
| 7.00 | 4-1/2 Beco | Pipe | 0.750 | 30.0 | 5.0 | Pin Only | 6.00 | 1,672 |
| 7.00 | 4-1/2 Beco | Pipe | 0.750 | 35.0 | 5.0 | Pin Only | 6.00 | 1,945 |
| 7.00 | 4-1/2 Beco | Pipe | 0.500 | 30.0 | 5.0 | Pin Only | 6.00 | 1,174 |
| 7.00 | 4-1/2 Beco | Pipe | 0.500 | 25.0 | 5.0 | Both Ends | 6.00 | 1,042 |
| 7.00 | 4-1/2 Beco | Pipe | 0.500 | 30.0 | 5.0 | Both Ends | 6.00 | 1,200 |
| 7.00 | 4-1/2 Beco | Pipe | 0.500 | 35.0 | 5.0 | Both Ends | 6.00 | 1,372 |
| 7.00 | 4-1/2 Beco | Pipe | 0.750 | 30.0 | 6.0 | Both Ends | 6.50 | 1,703 |
| 7.00 | 4-1/2 Beco | Pipe | 1.000 | 25.0 | 6.0 | Both Ends | 6.50 | 1,443 |
| 7.00 | 4-1/2 Beco | Starter Pipe | 0.500 | 25.7 | 5.0 | Pin End | No | 1,205 |
|
| 7.62 | 5-1/4 Beco | Pipe | 0.750 | 25.0 | 6.0 | Both Ends | 6.50 | 1,571 |
| 7.62 | 5-1/4 Beco | Pipe | 0.875 | 25.0 | 5.0 | Pin Only | 6.50 | 1,709 |
| 7.62 | 5-1/4 Beco | Pipe | 0.750 | 30.0 | 6.0 | Both Ends | 6.50 | 1,857 |
| 7.62 | 5-1/4 Beco | Pipe | 0.750 | 30.0 | 6.75 | Both Ends | No | 1,877 |
| 7.62 | 5-1/4 Beco | Pipe | 1.000 | 30.0 | 6.0 | Both Ends | 6.50 | 2,220 |
|
| 7.00 | 4-1/2 Beco | Pipe | 0.625 | 35.0 | 5.75 | Both Ends | No | 1,619 |
| 7.00 | 4-1/2 Beco | Pipe | 1.000 | 35.0 | 5.75 | Both Ends | No | 2,077 |
| 7.00 | 4-1/2 Beco | Pipe | 0.750 | 35.0 | 5.75 | Both Ends | No | 1,945 |
| 7.00 | 4-1/2 Beco | Starter Pipe | 1.000 | 30.3 | 5.75 | Both Ends | No | 1,760 |
| 7.00 | 4-1/2 Beco | Starter Pipe | 0.750 | 29.0 | 5.75 | Both Ends | No | 1,652 |
| 7.00 | 5-1/4 Beco | Pipe | 0.625 | 35.0 | 6.50 | Both Ends | No | 1,619 |
| 7.00 | 5-1/4 Beco | Starter Pipe | 0.625 | 31.9 | 6.50 | Both Ends | No | 1,478 |
| 7.00 | 5-1/4 Beco | Starter Pipe | 0.625 | 32.9 | 6.50 | Both Ends | No | 1,522 |
|
| 7.62 | 5-1/4 Beco | Pipe | 1.000 | 45.0 | 6.75 | Both Ends | No | 2,921 |
| 7.62 | 5-1/4 Beco | Pipe | 0.750 | 45.0 | 6.75 | Both Ends | No | 2,740 |
| 7.62 | 5-1/4 Beco | Pipe | 1.000 | 35.0 | 6.75 | Both Ends | No | 2,223 |
| 7.62 | 5-1/4 Beco | Pipe | 0.750 | 35.0 | 6.75 | Both Ends | No | 1,963 |
| 7.62 | 5-1/4 Beco | Starter Pipe | 1.000 | 32.9 | 6.75 | Both Ends | No | 2,408 |
|
| 8.62 | 6 Beco | Pipe | 0.906 | 50.0 | 7.75 | Both Ends | No | 5,410 |
| 8.62 | 6 Beco | Starter Pipe | 1.000 | 32.9 | 7.75 | Both Ends | No | 2,879 |
|
| 10.75 | 8 Beco | Pipe | 1.000 | 6.83 | 9.25 | Both Ends | No | 1,306 |
| Wrench Flats | |
| Dia (inch) | Thread Pin/Box | Comp | Wall Thick (inch) | Length (feet) | inch | Flat loc | Hex (inch) | Wgt (lbs.) |
| 7.00 | 4-1/2 Beco | Pipe | 1.000 | 40.0 | 5.75 | Both Ends | No | 2,394 |
| 7.62 | 5-1/4 Beco | Pipe | 1.000 | 40.0 | 6.75 | Both Ends | No | 3,223 |
| 8.62 | 6 Beco | Pipe | 1.000 | 40.0 | 7.75 | Both Ends | No | 4,595 |
| 10.75 | 8 Beco | Pipe | 1.000 | 40.0 | 9.25 | Both Ends | No | 5,471 |
| Wrench Flats | |
| Dia (inch) | Thread Pin/Box | Comp | Wall Thick (inch) | Length (feet) | inch | Flat loc | Hex (inch) | Wgt (lbs.) |
| 3.00 | 2 Z | Pipe | 0.250 | 13.0 | 2.25 | Both Ends | No | 104 |
| 3.00 | 2 Z | Pipe | 0.500 | 13.0 | 2.25 | Both Ends | No | 176 |
| 3.00 | 2 Z | Starter Pipe | 0.250 | 8.8 | 2.25 | Both Ends | No | 73 |
| 3.00 | 2 Z Pin, 2-3/8 API reg box | Starter Pipe | 0.500 | 8.0 | 2.25 | Both Ends | No | 132 |
| 3.00 | 2-3/8 API reg | Pipe | 0.254 | 10.0 | 2.25 | Both Ends | No | 79 |
| 3.50 | 2-1/2 Z | Pipe | 0.254 | 13.0 | 2.74 | Both Ends | No | 126 |
| 3.50 | 2-1/2 Z Pin, 2-3/8 API reg box | Starter Pipe | 0.368 | 8.86 | 1.75 | Pin Only | No | 106 |
| 3.50 | 2-1/2 Z Pin, 3-1/2 API reg box | Starter Pipe | 0.368 | 9.0 | 2.74 | Both Ends | No | 110 |
| 4.00 | 2-1/2 Z | Pipe | 0.250 | 13.0 | 3.00 | Both Ends | No | 148 |
| 4.00 | 2-1/2 Z | Starter Pipe | 0.250 | 8.0 | 3.00 | Both Ends | No | 95 |
| 4.00 | 2-1/2 Z Pin, 3-1/2 API reg box | Pipe | 0.500 | 13.0 | 3.00 | Both Ends | No | 249 |
| 4.00 | 2-1/2 Z Pin, 3-1/2 API reg box | Starter Pipe | 0.500 | 9.0 | 3.00 | Both Ends | No | 88 |
| Wrench Flats | |
| Dia (inch) | Thread Pin/Box | Comp | Wall Thick (inch) | Length (feet) | inch | Flat loc | Hex (inch) | Wgt (lbs.) |
| 4.50 | 3-1/2 API reg | Pipe | 0.37 | 25.0 | 3.50 | Pin Only | 4.00 | 412 |
| 4.50 | 3-1/2 API reg | Starter Pipe | 0.625 | 21.6 | 3.50 | Both Ends | No | 597 |
| 5.50 | 4 FH | Pipe | 0.415 | 25.0 | 4.50 | Both Ends | 5.00 | 733 |
| 7.62 | 4-1/2 Beco | Pipe | 0.500 | 20.0 | 6.00 | Both Ends | 6.50 | 923 |
| 7.62 | 4-1/2 Beco | Pipe | 0.500 | 30.0 | 6.00 | Both Ends | 6.50 | 1,297 |
| 7.62 | 4-1/2 Beco | Pipe | 0.500 | 25.0 | 6.00 | Both Ends | 6.50 | 1,110 |
| 7.62 | 5-1/4 Beco | Pipe | 0.750 | 8.0 | 6.75 | Both Ends | No | 626 |
| 7.62 | 5-1/4 Beco | Starter Pipe | 0.750 | 25.0 | 6.75 | Both Ends | No | 1,524 |
| Wrench Flats | |
| Dia (inch) | Thread Pin/Box | Comp | Wall Thick (inch) | Length (feet) | inch | Flat loc | Hex (inch) | Wgt (lbs.) |
| 7.62 | 5-1/4 Beco | Pipe | 2.000 | 35.0 | 6.62 | Both Ends | No | 3,830 |
| 8.62 | 6 Beco | Pipe | 2.000 | 35.0 | 7.75 | Both Ends | No | 4,996 |
| 10.75 | 8 Beco | Pipe | 1.000 | 35.0 | 9.25 | Both Ends | No | 4,511 |
| 12.75 | 8 Beco | Pipe | 1.000 | 35.0 | 10.50 | Both Ends | No | 5,026 |
| 13.38 | 10 Beco | Pipe | 1.000 | 35.0 | 11.38 | Both Ends | No | 5,264 |
| Wrench Flats | |
| Dia (inch) | Thread Pin/Box | Comp | Wall Thick (inch) | Length (feet) | inch | Flat loc | Hex (inch) | Wgt (lbs.) |
| 3.50 | 2-3/8 IF | Pipe | 0.368 | 20.0 | 2.75 | Box Only | No | 229 |
| 4.50 | 2-7/8 IF | Pipe | 0.337 | 20.0 | 3.50 | Box Only | No | 344 |
| 4.50 | 3-1/2 API reg | Pipe | 0.337 | 20.0 | 3.50 | Box Only | No | 344 |
| Dia (inch) | Thread Pin/Box | Wall Thick (inch) | Length (feet) | Circ Grip (inch) | Wgt (lbs.) |
| 3.50 | 2-3/8 API reg | 1/6 | 6.15 | 2-3/8 | 57 |
| 4.50 | 3-1/2 API reg | 1/4 | 6.15 | 3-3/4 | 104 |
| Std Lengths | Dia (inch) | Thread Pin/Box | Wall Thick (inch) | Length (feet) | Wrench Flats | Wgt (lbs.) |
| ROC F6 = 4.0m | 3 | 2-3/8 API reg | 1/4 | 13.12 | No flats | 106 |
| ROC L8 = 6.0m | 3 | 2-3/8 API reg | 1/4 | 16.40 | No flats | 128 |
| ROC 830 = 4.0m | | | | | | |
| ROC 860 = 5.0m | 3-1/2 | 2-3/8 API reg | 1/4 | 13.12 | No flats | 133 |
| ROC 936 = 6.0m | 3-1/2 | 2-3/8 API reg | 1/4 | 16.40 | No flats | 164 |
| ROC F6 = 4.0m | 3-1/2 | 2-3/8 API reg | 1/4 | 19.68 | No flats | 184 |
| ROC L6 = 5.0m or 4m (check conf of the rig) | 3-1/2 | 2-3/8 API reg | 1/3 | 19.68 | No flats | 280 |
| ROC L8 = 6.0m | 4 | 2-7/8 API reg | 1/4 | 13.12 | No flats | 152 |
| ROC 830 = 4.0m | 4 | 2-7/8 API reg | 1/4 | 16.40 | No flats | 197 |
| ROC 860 = 5.0m | 4 | 2-7/8 API reg | 1/4 | 19.68 | No flats | 232 |
| ROC 936 = 6.0m | 4-1/2 | 3-1/2 API reg | 1/4 | 19.68 | No flats | 254 |
| 4-1/2 | 3-1/2 API reg | 1/3 | 19.68 | No flats | 350 |
| 5-1/2 | 4-1/2 API reg | 1/3 | 19.68 | No flats | 442 |
|
| Wrench Flats |
|
| Dia (inch) |
Thread Pin/Box |
Wall Thick (inch) |
Length (feet) |
inch |
Flat location |
Wgt (lbs.) |
| 2-3/8 |
RD 50-6 |
1/6 |
9.8 |
2-1/6 |
Both Ends |
51 |
|
| 3 |
RD 50-6 |
1/6 |
4.9 |
2-5/8 |
Both Ends |
35 |
| 3 |
RD 50-6 |
1/6 |
6.6 |
2-5/8 |
Both Ends |
42 |
| 3 |
RD 50-6 |
1/6 |
9.8 |
2-5/8 |
Both Ends |
57 |
| 3 |
2-3/8 API reg |
1/6 |
3.3 |
2-5/8 |
Both Ends |
24 |
| 3 |
2-3/8 API reg |
1/6 |
4.9 |
2-5/8 |
Both Ends |
33 |
| 3 |
2-3/8 API reg |
1/6 |
6.6 |
2-5/8 |
Both Ends |
40 |
| 3 |
2-3/8 API reg |
1/6 |
9.8 |
2-5/8 |
Both Ends |
55 |
| 3 |
2-3/8 API reg |
1/4 |
3.3 |
2-5/8 |
Both Ends |
31 |
| 3 |
2-3/8 API reg |
1/4 |
4.9 |
2-5/8 |
Both Ends |
44 |
| 3 |
2-3/8 API reg |
1/4 |
6.6 |
2-5/8 |
Both Ends |
55 |
| 3 |
2-3/8 API reg |
1/4 |
9.8 |
2-5/8 |
Both Ends |
79 |
|
| 3-1/2 |
2-3/8 API reg |
1/6 |
3.3 |
2-5/8 |
Both Ends |
31 |
| 3-1/2 |
2-3/8 API reg |
1/6 |
4.9 |
2-5/8 |
Both Ends |
40 |
| 3-1/2 |
2-3/8 API reg |
1/6 |
6.6 |
2-5/8 |
Both Ends |
51 |
| 3-1/2 |
2-3/8 API reg |
1/6 |
9.8 |
2-5/8 |
Both Ends |
68 |
| 3-1/2 |
2-3/8 API reg |
1/4 |
3.3 |
2-5/8 |
Both Ends |
37 |
| 3-1/2 |
2-3/8 API reg |
1/4 |
4.9 |
2-5/8 |
Both Ends |
53 |
| 3-1/2 |
2-3/8 API reg |
1/4 |
6.6 |
2-5/8 |
Both Ends |
66 |
| 3-1/2 |
2-3/8 API reg |
1/4 |
9.8 |
2-5/8 |
Both Ends |
95 |
| 3-1/2 |
2-7/8 API reg |
1/4 |
9.8 |
2-5/8 |
Both Ends |
95 |
|
| 4 |
2-7/8 API reg |
1/4 |
9.8 |
3 |
Both Ends |
115 |
|
| 4-1/2 |
3-1/2 API reg |
1/6 |
9.8 |
3-3/4 |
Both Ends |
101 |
| 4-1/2 |
3-1/2 API reg |
1/4 |
3.3 |
3-3/4 |
Both Ends |
59 |
| 4-1/2 |
3-1/2 API reg |
1/4 |
4.9 |
3-3/4 |
Both Ends |
77 |
| 4-1/2 |
3-1/2 API reg |
1/4 |
6.6 |
3-3/4 |
Both Ends |
97 |
| 4-1/2 |
3-1/2 API reg |
1/4 |
9.8 |
3-3/4 |
Both Ends |
132 |
| 4-1/2 |
3-1/2 API reg |
1/4 |
14.8 |
3-3/4 |
Both Ends |
189 |
| 4-1/2 |
3-1/2 API reg |
1/4 |
19.7 |
3-3/4 |
Both Ends |
244 |
| 4-1/2 |
3-1/2 API reg |
1/3 |
3.3 |
3-3/4 |
Both Ends |
65 |
| 4-1/2 |
3-1/2 API reg |
1/3 |
6.6 |
3-3/4 |
Both Ends |
119 |
| 4-1/2 |
3-1/2 API reg |
1/3 |
9.8 |
3-3/4 |
Both Ends |
170 |
| 4-1/2 |
3-1/2 API reg |
1/3 |
19.7 |
3-3/4 |
Both Ends |
295 |
|
| 3-1/2 |
2-3/8 IF |
1/4 |
6.6 |
2-5/8 |
Both Ends |
68 |
| 3-1/2 |
2-3/8 IF |
1/6 |
9.8 |
2-5/8 |
Both Ends |
68 |
|
| 4-1/2 |
2-7/8 IF |
1/4 |
19.7 |
3-3/4 |
Both Ends |
247 |
