Missile LXQ Series - LXQR6000 IR360 Shank

Features:

• Easy to service
• Special heat-treated alloy piston for long life, Rockwell hardness 60
• Minimum loss of performance when injecting foam or water

Specifications

Length (w/o drill bit)	48.7"
Outside Diameter	5.413"
Weight (w/o bit)	226.66 lbs.
Cylinder Bore	4.268"
Piston O.D.	4.263"
Piston Stroke	4.527"
Piston Weight	45.81 lbs.
Hole Sizes	6" - 8"
Air Pressure Consumption	100 psi - 400 psi
Wrench Size	A/F 3.968"
Connection	Std. 3 1/2" API Reg Pin

Air Consumption Chart

PSI	150	200	250	300	350	400
CFM with blank choke	350	510	665	825	990	-
with 1/8" choke	385	570	735	915	1,090	-
with 1/4" choke	440	650	830	1,009	1,190	-

All Hammers come Fitted with blank Choke located in the Air Check Valve

Lubrication

G-Force Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1/3 Pint per 100 cfm per hour.

Recommended Grades of Lubricant

ESSO MATEX CASTROL SHELL MOBILE

AROX EP 150 RDO 302 RD OIL DP 100 AIR TOOL OIL 2 A 320 ALMO NO. 5

Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

Recommended Pull Down

Minimum @ 100 psi - 1500 lbs.

Maximum @ 350 psi - 4000 lbs.

---

Missile Warranty will be voided by the following:

Welding on Wear Sleeve.
Heating Case with a Torch.
Gripping Wrenches across Threads.
Hammering on Casing.

READ WARNING LABEL ATTACHED TO HAMMER.